结论:房间中可吸入颗粒物的浓度的增高是由于送风口的吹扫气流使得房间静止的颗粒物被吹扫搅起的结果。
互联网 2024-09-17 10:25:29
实验室试验结果表明,在不同的氧硫比、吹气比和切换周期的条件下,SO2转化率的最大增值为1.17%~3.74%。
来源:互联网氨氮吹脱试验结果表明,在水温为20.6℃、pH值为10.8、曝气时间为4h的条件下,氨氮去除率为80.8%。
来源:互联网A model of optimized dephosphorization in the primary blowing period for top-blown oxygen converter
氧气转炉吹炼前期的最佳化脱磷工艺基础
来源:互联网转炉炼钢过程控制的核心是吹炼终点控制模型,该模型又由三个子模型组成。
来源:互联网用计算机控制转炉冶炼过程,是科学的组织炼钢生产的重要手段。
来源:互联网The design and implementation of resc, a real time expert system for converter blowing control
转炉吹炼实时控制专家系统RESC的设计与实现
来源:互联网For high efficiency BOF, one converter blowing system, capacity is 190~ 280 t;
对于高效转炉,采用一座转炉吹炼制,其容量范围为190~280t。
来源:互联网Implementing the converter blowing control with an object-oriented programming method
用面向对象的方法实现转炉吹炼控制模型
来源:互联网铝合金摩托车液压式前减震器筒体特殊的结构、严格的技术要求,导致生产中铸件很容易出现缩松、皮下气孔等缺陷。
来源:互联网对影响球墨铸铁件皮下气孔的各种因素分析表明,铁液中气体的产生有其必然性,通过减少气体的发生量以防止皮下气孔的方法并不是都能奏效。
来源:互联网当水冷法管模涂料发气量≤55mL/g时,铸管表面不产生气孔缺陷。
来源:互联网Study on Making Use of Graphitizing Expansion to Eliminate Surface Blowhole of Ductile Cast Iron
利用石墨化膨胀消除球铁皮下气孔的研究
来源:互联网试验表明,只要涂料发气量小于5ml/g,铸管不会产生表面气孔。
来源:互联网储集空间具有多成因性,以原生气孔和次生溶蚀孔为主。
来源:互联网研究合金成份和原始含气量对生成二次气孔的影响。铸件型腔气体和铸件品质
来源:互联网阐述渣气孔的分布和形态、渣气孔的成因、缺陷判断和防止措施。
来源:互联网英语巴士 · 中考英语
英语巴士 · 中考英语
英语巴士 · 四六级英语
英语巴士 · 中考英语
英语巴士 · 双语新闻
英语巴士 · 中考英语
英语巴士 · 中考英语
英语巴士 · 双语新闻
英语巴士 · 双语新闻
英语巴士 · 中考英语