Then, slight or strong acid liquids are used to etch the surface of the alloys.

Inductively coupled plasma was first used to dry etch of InSb thin film.

应用感应耦合等离子体技术首次实现了对锑化铟薄膜的干法刻蚀.

A directional angled etch process is used to form the two angled facets.

使用定向有角度的蚀刻过程来形成两个有角度的刻面.

The removal of this metal or alloy results in the desired etch pattern.

这项金属切除或合金在所需的蚀刻模式的结果.

Rodriguez continues etch his name in the history books on a seemingly daily basis.

亿元男似乎以日为基础持续将自己的名字刻画在历史的名册上.

Is the etch unifomity monitored at least monthly and records maintained as a quality document?

是否至少定期稽核一次蚀刻站并有相应的维护记录作为品质文件?

She was very beautiful, with high cheekbones.

她颧骨高高的，非常漂亮。

The selection of stripper used after metal trench FSG etch to data retention performance.

对氟硅玻璃蚀刻后清洗剂的选择对数据保持特性的影响.

He touched her high cheekbones.

他紧紧贴住她那高高的颊骨.

Erosibility and prbroin to reveal some of the glass, that is, you need to etch pattern.

抗蚀膜上露出玻璃的部分, 即是需要蚀刻的图案.

There were deep furrows in the cheeks, the cheekbones felt sharp, the nose flattened.

脸颊上有很深的皱纹.颧骨高耸, 鼻子塌陷.

Hence , bIond hair , bIue eyes, cheekbones.

我说呢, 看看你的金发碧眼, 你的颧骨.

The pose emphasized her high cheekbones.

这个姿势突出了她高高颧骨.

There were pouches under the eyes, the skin sagged from the cheekbones.

眼眶下面有皱纹,双颊的皮肉松弛.

At the same time copper elongation, crystallization structure would amount to Etchant characteristics of direct impact.

同时铜的延伸率 、 暗地结晶布局等,城市构不败不不对蚀刻液共性的间接感化.

Etchant chemicals: Etchant chemical components, it is not the same as the etching rate, etching coefficient.

蚀刻液的化学身分的构不败: 蚀刻液的化学组分不不对别, 其蚀刻速度不离不不异, 蚀刻系数也不不对别.

He had an angular face with prominent cheekbones.

他的脸棱角分明，颧骨突出。

She also gave up green locks , pouty lips and cheekbones of a supermodel.

她同时放弃了绿发, 翘起的嘴唇,还有超级模特般的颧骨.

In addition , the adoption of temperature nitrate bath for etchant will also prevent the soft spot.

采用低温硝盐浴作淬火介质也能防止淬火软点.

Bronze a supermodel glow & sleek , sculpted cheekbones. This satiny pink & bronze powder a perfect 10!

十分完美腮红蜜粉粉红 及 古铜闪粉二合一,可塑造颧骨光影, 营造健康肤色, 得到完美10分.

More often, all of the materials exposed to the etchant have a finite etch rate.

通常, 所有暴露在刻蚀剂中的材料都具有一定的刻蚀速率.